See Figure 1. Remove and discard one rear fender support screw.
Get a rear docking point (1), screw (3), and spacer (4). The kit includes two kinds of spacer， you need to choose one）from the equipment.
Install the docking point, countersunk end（A）last as the picture, onto the screw threads, followed by the spacer.
Apply a few drops of Loctite 243 – Blue to the first four threads of the screw.
Install the screw through the fender support (B) and fender and into the rear mounting bracket (C). Tighten to proper
Remove and discard the front fender support screw on the same side of the vehicle.
Get a front docking point (2), screw (3), and docking spacer(4) from the kit.
Install the docking point onto the screw threads, followed by the spacer.
Install the screw through the fender support and fender and into the front mounting bracket (D). Tighten to proper
Repeat Steps 1-9 on the opposite side of the fender.